R-30iB Plus
ARC Mate 100iD/16S
16 kg (35 lb) 1,103 mm (43.4 in)
Used Fanuc ARC Mate 100iD Welding Robot for Sale
R-30iB Plus
- Payload
- 12 kg (26 lb)
- Reach
- 1,441 mm (56.7 in)
- Axes
- 6
- Repeatability
- ±0.02 mm (0.0008 in)
- Controller
- R-30iB Plus
The ARC Mate 100iD is the standard arm in the R-30iB Plus welding generation. Payload is 12 kg (26 lb) and reach is 1,441 mm (56.7 in), with tighter repeatability than the 100iC. Rice Automation refurbishes the 100iD and supports the iPendant Touch.
Download spec sheet (PDF)A robotic welding cell for this robot is quoted around the arm. Robotic welding is the robot, the welder, and the cell working together.
Specifications
| Axes | 6 |
|---|---|
| Payload | 12 kg (26 lb) at the wrist |
| Reach | 1,441 mm (56.7 in) |
| Motion range (X, Y) | 1,441 mm (56.7 in), 2,616 mm (103.0 in) |
| Repeatability | ±0.02 mm (0.0008 in) |
| Mass | 145 kg (320 lb) |
| Mounting | Floor and upside-down are standard. Angle is on request. Motion range may be restricted by the mounting angle. |
| Hollow wrist | 57 mm (2.2 in) |
| Protection | Body IP54. Wrist and J3 IP67. |
| Controller | R-30iB Plus or R-30iB Mate Plus |
Payload: 12 kg (26 lb). Reach: 1,441 mm (56.7 in). Repeatability: ±0.02 mm (0.0008 in). Controller: R-30iB Plus. Mass: 145 kg (320 lb).
Controller
The ARC Mate 100iD runs on the R-30iB Plus, in the A-cabinet or B-cabinet, or on the compact R-30iB Mate Plus, with the iPendant Touch. Some newer arms ship on an R-50iA. Rice Automation will tell you which cabinet is on it.
What it is good for
Everyday arc welding at about 1.4 m, with a 12 kg (26 lb) wrist and the repeatability of the iD generation.
Welders and torches
The 100iD is an arc-welding robot. It connects to the major arc-welding power supplies. Call and we will tell you the welder, feeder, and torch on the ARC Mate 100iD.
Refurbishment
Every used ARC Mate 100iD is serviced and run under power at Rice Automation before it ships. We check the arm, the R-30iB Plus controller, and the welder package, and you can see it run before you buy. It is a fit for everyday arc welding at about 1.4 m, with a 12 kg (26 lb) wrist and the repeatability of the iD generation. Call (877) 855-7020 for current units and pricing.
The shop process is on the refurbishment page.
Units in stock
None listed right now. Leave an email and we will write when a refurbished ARC Mate 100iD is listed.
Related models
Questions
Which controller is a used Fanuc ARC Mate 100iD paired with?
The ARC Mate 100iD runs on the R-30iB Plus, in the A-cabinet or B-cabinet, or on the compact R-30iB Mate Plus, with the iPendant Touch. Some newer arms ship on an R-50iA. Rice Automation will tell you which cabinet is on it.
What are the payload and reach of the Fanuc ARC Mate 100iD?
Payload: 12 kg (26 lb). Reach: 1,441 mm (56.7 in). Repeatability: ±0.02 mm (0.0008 in). Controller: R-30iB Plus. Mass: 145 kg (320 lb).
What is a used ARC Mate 100iD good for?
Everyday arc welding at about 1.4 m, with a 12 kg (26 lb) wrist and the repeatability of the iD generation.
Which welders are paired with the Fanuc ARC Mate 100iD?
The 100iD is an arc-welding robot. It connects to the major arc-welding power supplies. Call and we will tell you the welder, feeder, and torch on the ARC Mate 100iD.
What does Rice Automation check before an ARC Mate 100iD ships?
Every used ARC Mate 100iD is serviced and run under power at Rice Automation before it ships. We check the arm, the R-30iB Plus controller, and the welder package, and you can see it run before you buy. It is a fit for everyday arc welding at about 1.4 m, with a 12 kg (26 lb) wrist and the repeatability of the iD generation. Call (877) 855-7020 for current units and pricing.
Can I sell a used ARC Mate 100iD to Rice Automation?
Yes. We buy used Fanuc welding robots, including the ARC Mate 100iD. Tell us the controller and the welder, or call (877) 855-7020.
Selling a used ARC Mate 100iD
Rice Automation buys used Fanuc welding robots. Tell us about this ARC Mate 100iD, including the controller and welder that are on it.