Used Fanuc ARC Mate 100iC/7L Welding Robot for Sale
Also searched as Arcmate 100ic7l.
R-30iB
- Payload
- 7 kg (15 lb)
- Reach
- 1,632 mm (64.3 in)
- Axes
- 6
- Repeatability
- ±0.03 mm (0.001 in)
- Controller
- R-30iB
The ARC Mate 100iC/7L is the long arm at 1,632 mm (64.3 in) with a 7 kg (15 lb) wrist, on the R-30iB, full cabinet or R-30iB Mate. The 6 kg (13 lb) robot at that reach is the ARC Mate 100iC/6L. Rice Automation refurbishes the 7L and supports the iPendant.
Download spec sheet (PDF)A robotic welding cell for this robot is quoted around the arm. Robotic welding is the robot, the welder, and the cell working together.
Specifications
| Axes | 6 |
|---|---|
| Payload | 7 kg (15 lb) at the wrist |
| Reach | 1,632 mm (64.3 in) |
| Repeatability | ±0.03 mm (0.001 in) |
| Mounting | Floor, upside-down, or angle |
| Controller | R-30iB (full cabinet or R-30iB Mate) |
Payload: 7 kg (15 lb). Reach: 1,632 mm (64.3 in). Repeatability: ±0.03 mm (0.001 in). Controller: R-30iB.
Controller
The ARC Mate 100iC/7L runs on the R-30iB controller, full cabinet or R-30iB Mate, with the iPendant. The 6 kg (13 lb) 100iC/6L at the same reach uses the R-30iA and has its own page. Rice Automation refurbishes the 7L and will tell you which cabinet is on it.
What it is good for
Long-arm welding at 1,632 mm (64.3 in) with a 7 kg (15 lb) wrist.
Welders and torches
An ARC Mate connects to the major arc-welding power supplies. Call and we will tell you the welder, feeder, and torch on the ARC Mate 100iC/7L.
Refurbishment
Every used ARC Mate 100iC/7L is serviced and run under power at Rice Automation before it ships. We check the arm, the R-30iB controller, and the welder package, and you can see it run before you buy. It is a fit for long-arm welding at 1,632 mm (64.3 in) with a 7 kg (15 lb) wrist. Call (877) 855-7020 for current units and pricing.
The shop process is on the refurbishment page. Free training videos with every robot.
Units in stock
None listed right now. Leave an email and we will write when a refurbished ARC Mate 100iC/7L is listed.
Questions
Which controller is a used Fanuc ARC Mate 100iC/7L paired with?
The ARC Mate 100iC/7L runs on the R-30iB controller, full cabinet or R-30iB Mate, with the iPendant. The 6 kg (13 lb) 100iC/6L at the same reach uses the R-30iA and has its own page. Rice Automation refurbishes the 7L and will tell you which cabinet is on it.
What are the payload and reach of the Fanuc ARC Mate 100iC/7L?
Payload: 7 kg (15 lb). Reach: 1,632 mm (64.3 in). Repeatability: ±0.03 mm (0.001 in). Controller: R-30iB.
What is a used ARC Mate 100iC/7L good for?
Long-arm welding at 1,632 mm (64.3 in) with a 7 kg (15 lb) wrist.
Which welders are paired with the Fanuc ARC Mate 100iC/7L?
An ARC Mate connects to the major arc-welding power supplies. Call and we will tell you the welder, feeder, and torch on the ARC Mate 100iC/7L.
What does Rice Automation check before an ARC Mate 100iC/7L ships?
Every used ARC Mate 100iC/7L is serviced and run under power at Rice Automation before it ships. We check the arm, the R-30iB controller, and the welder package, and you can see it run before you buy. It is a fit for long-arm welding at 1,632 mm (64.3 in) with a 7 kg (15 lb) wrist. Call (877) 855-7020 for current units and pricing.
Can I sell a used ARC Mate 100iC/7L to Rice Automation?
Yes. We buy used Fanuc welding robots, including the ARC Mate 100iC/7L. Tell us the controller and the welder, or call (877) 855-7020.
Selling a used ARC Mate 100iC/7L
Rice Automation buys used Fanuc welding robots. Tell us about this ARC Mate 100iC/7L, including the controller and welder that are on it.